#MOWER ONLY STARTS WITH STARTING FLUID MANUALS#
#MOWER ONLY STARTS WITH STARTING FLUID FREE#

In contrast, if you own a two-cycle mower, observe if there is unburned gas that is released when you try to start the engine. This white smoke could mean that there is oil that is burning in the mower engine. Alternatively, you can observe whether your mower releases white smoke if you try to turn the engine over. – Oil Level IssueĪnother thing you could check is the oil level.

If not, you can give it a good cleaning if dirt has already accumulated on it. You can easily inspect the spark plug and replace it once you ensure that it is already damaged. There are a lot of reasons why spark plugs cause issues, but if your engine starts with starter fluid then dies, a faint spark is probably the reason. So this is the time when you have to look at the spark plugs. If you have already checked the fuel and the carburetor and both turned out fine, then maybe those problems are not related to the gas supply but rather in igniting the gas. Keep in mind that you should always check the carburetor and the fuel before using the lawn mower, especially if you had not used the machine for a couple of years. Though not all types of gas easily turn bad as time goes by, it is recommended to add a fuel stabilizer to prevent your fuel from getting old and going bad for a longer period of time. When old fuel turns to gunk in the carburetor, the same thing happens in the fuel tank. When this happens, the gas in the bowl of the carburetor becomes gunk over time. This happens when your lawn mower is not used often and is allowed to stay running for a long time. So, issues that have to do with a dirty carburetor can be considered as one of the culprits. What is really happening is that the starter fluid is enough that your lawn mower starts at first, but since the carburetor is not supplying the right ratio of air and fuel, the engine suddenly stops after a while. One of the common reasons why a small engine turns over when you are using a starting fluid and then dies is a fuel supply-related issue. Ĭommonly, air filters can be clogged by oil due to incorrect tilting of the lawn mower or when your mower is filled with dirt and debris that have accumulated over time. Having a dirty or clogged air filter will result in an inadequate amount of air that can enter the engine, such that your mower won’t start. However, this issue is not difficult to identify. Issues with the air filter commonly cause a lot of different troubles for lawn mowers. Here are the common reasons why your engine only starts with starter fluid then dies, let’s begin to tackle them one by one and discover what is really happening with your lawn mower.

It is important to identify the root cause before administering a solution. Your lawn mower starts with starter fluid then dies because of a clogged or dirty air filter, a carburetor issue, old gas, a defective or dirty spark plug, oil level issues, or a blocked fuel cap. Why Does Your Lawn Mower Starts With Starter Fluid Then Dies?

How Can You Fix Your Lawn Mower Starts With Starter Fluid Then Dies?.

Why Does Your Lawn Mower Starts With Starter Fluid Then Dies?.

Then send the new carburetor back to Amazon. Buy some sta-bil for your all your power equipment. A little goes a long way and besides you can ruin the motor with too much. Be easy on how much starting fluid you use.

#MOWER ONLY STARTS WITH STARTING FLUID MANUALS#

You can also find many manuals online to check how the linkage is supposed to be. So I would clean old carb with carb cleaner, blow it out afterwards. Having said that you probably will need to remove the carb to fix the linkage. If new carb installed has gas in bowl then I suspect your problem now, is even though you think you installed the new carb correctly I have a hunch the spring and linkage connection is your problem now. If u loosen the bowl fitting while still installed and you get gas leaking before you even get close to unthreaded completely, then your getting gas to motor. The float might b sticking on the new one but I doubt it. Done right it most likely would have started and ran fine. You should have just cleaned your original carb. My guess with taking all you wrote in mind. Rebuild kits are really for only worn out carbs. Unless your carb is 10 or more years old I doubt that a rebuild kit is gonna change anything. All that needs to be done to it is Clean entire carb with cleaner or my favorite wire thru ports, finish if available with air. Your old carb is probably fine even with the dent. You can then leave the gas in it and it’s gonna start right up in the spring.

#MOWER ONLY STARTS WITH STARTING FLUID FREE#

The easiest thing for care free mower usage is buy cheap gas not high octane and always use a gas treatment to neutralize the ethanol. The biggest issue is using untreated gas and not following the end of season maintenance in the manual. My experience is it usually is a carb problem.

Mower only starts with starting fluid